Doppler Bandwidth
Increase Doppler Bandwidth
Use this command to increase the Doppler bandwidth. Maximum bandwidth is 50kHz.
If the Doppler bandwidth is too low then the signal will be clipped or aliased back into the set bandwidth.
The bandwidth is controlled by switching the sample rate of the raw Doppler signal.
There are no antialiasing filters. It is recommended to start witha high bandwidth and switch to the lowest necessary for the measurement.
Lower Doppler Bandwidth
Use this command to lower the Doppler bandwidth. Minimum bandwidth is 6.25kHz.
If the Doppler bandwidth is too low then the signal will be clipped or aliased back into the set bandwidth.
The bandwidth is controlled by switching the sample rate of the raw Doppler signal.
There are no antialiasing filters. It is recommended to start with a high bandwidth and switch to the lowest necessary for the measurement.