Activation Code

  1. When you start CapiMetrics for the first time you’ll see this message.

../_images/licencefailed.jpg

  1. Followed by this

../_images/licencecheckfailed2.jpg

3. You should then be asked for your activation code and some details to put on your licence.

../_images/requestlicence.jpg

4. If your licence is ready and downloads successfully you should see this message:

../_images/downloaded.jpg

  1. Followed by this message.

../_images/requestsent.jpg

6. You will then be asked if you would like to use it in a demonstration mode. Click Cancel or enter the monthly demo codes.

../_images/democode1.jpg ../_images/dynpasscode.jpg

7. You will then be requested to select which features to enable. Select lower two options as shown and click ok.

../_images/options.jpg

  1. Then you’ll be asked to restart CapiMetrics

../_images/restart.jpg

PROBLEMS

1. If you start CapiMetrics with the licence for a different computer, will produce:

../_images/idnomatch.jpg ../_images/licencecheckfailed2.jpg ../_images/notactivated.jpg